|
Position ID: |
21246 |
Status: |
Closed |
|
Location: |
Charleston, South Carolina, United States |
How Many: |
9 |
|
Duration: |
12+ Month(s) |
Pay Rate: |
DOE |
|
Employment Type: |
Contract |
Uniform required:
|
No
|
|
Work shift:
|
Shift-2
|
|
|
Position Description:
** Second Shift Position - 2:30pm-11pm. Candidate must be willing to work any shift**
Experience may include (but is not limited to) the following products: 717, 737, 757, 747, 767, 777, 787, C-17, F-18, MD80 and MD90. Experience may include (but is not limited to) the following non Company products: A300, A319, A320, A321, CRJ100, CRJ200, CRJ300, and CRJ700.
Performs composite related fabrication of detail parts and subassemblies from carbon fiber, fiberglass and other light weight materials commonly use in the aerospace industry. Performs automated lay-up machine set-up and operation. Performs composite lay-up, fabrication and assembly tasks. Ability to understand the use and fabrication of pre-manufactured composite materials using, blueprints, engineering drawings and planning from non conformance dispositions. Accomplishes these processes by using fabrication tooling materials and automated / motorized equipment. Accomplishes related functions to provide complete fabrication details and subassemblies via hand-lay-up methods or through the use of NC equipment. Will be required to work at heights and/or on an elevated work platform. Will be required to support ALL shifts, weekend support up to and not limited to 10-12 hour work days. Basic computer skills is a requirement. Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc., in order to accomplish work statement in accordance with planned operations. Be capable and proficient in the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with company procedures. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.
Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Coordinate pertinent information with employees on other shifts. Ability to work any shift (days, evenings and midnights), stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.
Requirements:
**This is a Second Shift Position - 2:30pm-11pm. However, candidate must be willing to work any shift**
Teammates must have the ability to perform the following physical requirements:
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Use personal protective equipment for face/eyes and ears as required
• Handle, use, and dispose of hazardous material
• Obtain & maintain personal certifications as required to support job responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Occasional lifting of 21-35 pounds
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
• Occasional contact with metals
• Exposure to plastics and solvents to atmospheric conditions
• Frequent exposure to noise
CANDIDATE MUST BE WILLING TO WORK ANY SHIFT.
|
|
Requirements:
**This is a Second Shift Position - 2:30pm-11pm. However, candidate must be willing to work any shift**
Teammates must have the ability to perform the following physical requirements:
• Pass visual acuity and color perception tests
• Read, write, and comprehend the English language
• Use personal protective equipment for face/eyes and ears as required
• Handle, use, and dispose of hazardous material
• Obtain & maintain personal certifications as required to support job responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Occasional lifting of 21-35 pounds
• Frequent reaching overhead (3 to 6 hrs)
• Frequent walking on flat surfaces
• Frequent standing flat or uneven surfaces
• Frequent balancing on a ladder, steps, or uneven surfaces
• Occasional climbing on 3-12 ft ladders or stands
• Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
• Occasional contact with metals
• Exposure to plastics and solvents to atmospheric conditions
• Frequent exposure to noise
CANDIDATE MUST BE WILLING TO WORK ANY SHIFT.
|
|
| Applying for Position # 21246 Fabrication Specialist A (2nd shift)
|
|
Details
|
|
|
|
CTS Pays For Referrals! Call us today to learn more!!
|
|
|
|
|
|
|
|
|
|
 | Loading… |
|
