Open Positions | CTS International

Systems Engineering Support Analyst 4

ID # 376771 Easy Apply Apply with Login

Colorado Springs, Colorado

May 02 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

**Secret Clearance Required to Start.** The PTES program is developing a new Global Military Satellite Communications (MILSATCOM) Ground System that will manage transmission of protected tactical waveform - a type of secure, anti-jam communication - over Company-built Wideband Global SATCOM (WGS) satellites and terminals. As a member of the team, you will be involved in the entire development life cycle, from idea creation and development, all the way through to maintenance and support of the customer’s delivered system. These positions will place you in roles where you have the opportunity to make an impact on the results of our project. The PTES team offers a collaborative mentoring environment where you have the opportunity to learn, to mentor others, and be a part of establishing the future of our organization Position Responsibilities: • Use CM knowledge to develop, recommend, and maintain CM practices, policies, and procedures to support planning, identification, preparation, reviewing, releasing, controlling, changing, and providing the status of all technical data related to the system or equipment under configuration control. • Establishes the goals of the CM process and effectively coordinates with appropriate personnel to ensure any configuration changes are: identified, tracked throughout the life cycle management, status of each item is known • Review released engineering change data and documents changes to ensure adherence to CM practices, policies, and procedures and with the required Configuration and Data Management Plan. • Maintains / enforces procedures and processes to ensure compliance with company and contractual requirements • Contributes to the development and refinement/improvement of Configuration and Data Management standards, processes and tools; leads implementation of these items • Interprets and enforces Configuration Management and Data Management requirements for product hardware, software and engineering design data systems throughout the product lifecycle. • Train and distribute information to technical and managerial staff on CM practices, policies, and procedures. • Processes changes throughout the entire lifecycle of a change, change request receipt, coordination with the mandatory evaluators, tracking, board support, directive generation and action tracking to closure. • Assists the development of change proposals. • Interprets and enforces Configuration and Data Management requirements for product hardware, software and engineering design data systems that span multiple engineering functions throughout the product lifecycle. • Develops and maintains Configuration and Data Management customer deliverables. • Tracks and reports data to monitor adherence to regulatory, configuration and contractual requirements. • Supports development of media, Software product end items, and other baseline deliverables to the Customer. • Administers configuration management activities related to identification, control and accounting for engineering documents, parts, and BOMS for systems and/or equipment in accordance with contractual requirements. • Participates in reviewing engineering change data and coordinates changes with engineering, quality assurance and manufacturing to ensure compliance with customer requirements and Company policy. • Maintains procedures for (1) storage, retention and destruction of company records, and (2) processing, storing and retrieving current and historical design, technical and programmatic documents according to project, customer and company practices and requirements. • Provides visibility to the nature of each change, the system or process impact, and traceability of not only the current revision but the past fielded system versions and future planned revisions through the Change Control Board process (organization or customer driven). • Perform periodic reviews and verify version release configuration items. • Plan, document, execute, schedule and conduct jointly with Quality Assurance personnel and the Government customer System Verification Reviews (SVR)/Functional Configuration Audits (FCA) and Physical Configuration Audits (PCA) • Couriers (in local area) and receives/sends classified data in collaboration with local security personnel; this may involve the creation of classified media

View Job Description

Systems Engineering Support Analyst 4

**Secret Clearance Required to Start.** The PTES program is developing a new Global Military Satellite Communications (MILSATCOM) Ground System that will manage transmission of protected tactical waveform - a type of secure, anti-jam communication - over Company-built Wideband Global SATCOM (WGS) satellites and terminals. As a member of the team, you will be involved in the entire development life cycle, from idea creation and development, all the way through to maintenance and support of the customer’s delivered system. These positions will place you in roles where you have the opportunity to make an impact on the results of our project. The PTES team offers a collaborative mentoring environment where you have the opportunity to learn, to mentor others, and be a part of establishing the future of our organization Position Responsibilities: • Use CM knowledge to develop, recommend, and maintain CM practices, policies, and procedures to support planning, identification, preparation, reviewing, releasing, controlling, changing, and providing the status of all technical data related to the system or equipment under configuration control. • Establishes the goals of the CM process and effectively coordinates with appropriate personnel to ensure any configuration changes are: identified, tracked throughout the life cycle management, status of each item is known • Review released engineering change data and documents changes to ensure adherence to CM practices, policies, and procedures and with the required Configuration and Data Management Plan. • Maintains / enforces procedures and processes to ensure compliance with company and contractual requirements • Contributes to the development and refinement/improvement of Configuration and Data Management standards, processes and tools; leads implementation of these items • Interprets and enforces Configuration Management and Data Management requirements for product hardware, software and engineering design data systems throughout the product lifecycle. • Train and distribute information to technical and managerial staff on CM practices, policies, and procedures. • Processes changes throughout the entire lifecycle of a change, change request receipt, coordination with the mandatory evaluators, tracking, board support, directive generation and action tracking to closure. • Assists the development of change proposals. • Interprets and enforces Configuration and Data Management requirements for product hardware, software and engineering design data systems that span multiple engineering functions throughout the product lifecycle. • Develops and maintains Configuration and Data Management customer deliverables. • Tracks and reports data to monitor adherence to regulatory, configuration and contractual requirements. • Supports development of media, Software product end items, and other baseline deliverables to the Customer. • Administers configuration management activities related to identification, control and accounting for engineering documents, parts, and BOMS for systems and/or equipment in accordance with contractual requirements. • Participates in reviewing engineering change data and coordinates changes with engineering, quality assurance and manufacturing to ensure compliance with customer requirements and Company policy. • Maintains procedures for (1) storage, retention and destruction of company records, and (2) processing, storing and retrieving current and historical design, technical and programmatic documents according to project, customer and company practices and requirements. • Provides visibility to the nature of each change, the system or process impact, and traceability of not only the current revision but the past fielded system versions and future planned revisions through the Change Control Board process (organization or customer driven). • Perform periodic reviews and verify version release configuration items. • Plan, document, execute, schedule and conduct jointly with Quality Assurance personnel and the Government customer System Verification Reviews (SVR)/Functional Configuration Audits (FCA) and Physical Configuration Audits (PCA) • Couriers (in local area) and receives/sends classified data in collaboration with local security personnel; this may involve the creation of classified media

12+ months, possible extension and FTE opportunity

View Job Description

Electrical Harness Installation Engineer - EWIS

ID # 376770 Easy Apply Apply with Login

View Job Description

Electrical Harness Installation Engineer - EWIS

View Job Description

MP&P Technical Analyst 1

ID # 376769 Easy Apply Apply with Login

Tukwila, Washington

April 29 2024

Openings # 2

6+ months, possible extension and possible FTE opportunity

View Job Description

MP&P Technical Analyst 1

View Job Description

Composites Technician 2

ID # 376768 Easy Apply Apply with Login

Tukwila, Washington

April 29 2024

Openings # 2

6+ months, possible extension and possible FTE opportunity

View Job Description

Composites Technician 2

View Job Description

Equipment Manager Engineer 3

ID # 376767 Easy Apply Apply with Login

Oklahoma City, Oklahoma

May 24 2024

Openings # 4

10+ months, possible extension and possible FTE opportunity

Must be able to obtain a Secret Clearance. Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. Korea and UK E-7 recently had EAC updates that called for more people needed by Mission Systems to support hardware equipment qualification. We are seeking a highly skilled and experienced Equipment Manager Engineer Level 3 to join our team and provide support for the US and International customers. As an Equipment Manager Engineer, you will play a crucial role in developing, documenting, and maintaining complex electronic and electrical systems for mission systems hardware. Responsibilities: Collaborate with customers to understand and define complex electronic and electrical system requirements for mission systems hardware. Analyze and translate requirements into system, hardware, and software designs, ensuring compliance with industry standards and regulations. Develop interface specifications for seamless integration of Mission Systems Hardware. Conduct thorough testing and validation to ensure that system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with specified requirements. Provide technical support and troubleshooting for fielded hardware and software throughout the entire product lifecycle. Stay updated with the latest advancements in Mission Systems Hardware technology and research potential applications to address company business needs.

View Job Description

Equipment Manager Engineer 3

Must be able to obtain a Secret Clearance. Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. Korea and UK E-7 recently had EAC updates that called for more people needed by Mission Systems to support hardware equipment qualification. We are seeking a highly skilled and experienced Equipment Manager Engineer Level 3 to join our team and provide support for the US and International customers. As an Equipment Manager Engineer, you will play a crucial role in developing, documenting, and maintaining complex electronic and electrical systems for mission systems hardware. Responsibilities: Collaborate with customers to understand and define complex electronic and electrical system requirements for mission systems hardware. Analyze and translate requirements into system, hardware, and software designs, ensuring compliance with industry standards and regulations. Develop interface specifications for seamless integration of Mission Systems Hardware. Conduct thorough testing and validation to ensure that system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with specified requirements. Provide technical support and troubleshooting for fielded hardware and software throughout the entire product lifecycle. Stay updated with the latest advancements in Mission Systems Hardware technology and research potential applications to address company business needs.

10+ months, possible extension and FTE opportunity

View Job Description

Stress Analyst 5 - Interiors

ID # 376766 Easy Apply Apply with Login

Appleton, Wisconsin

May 10 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

Responsibilities include performing stress analysis and related activities for new and derivative designs of interior furnishings and amenities as part of outfitting new aircraft. This includes review of Engineering models and drawings, preparing load calculations, and writing stress reports in collaboration with the Structural Engineering group and Structural AR's providing approvals. Example designs include custom cabinetry such as galleys, lavatories, closets, and other storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. Analysis of airframe modifications to meet the requirements of interior installation may also be involved. Additional responsibilities include aircraft level analysis such as decompression and floor loading analysis. Analysis is done utilizing Classical hand analysis and Finite Element Modeling using FEMAP with Nastran. Must have working knowledge of Title 14 of the Code of Federal Regulations (14CFR - especially Chapter I, Part 25), as it pertains to Federal Aviation Administration (FAA) regulation procedures and the STC process as it relates to certification of Aircraft Interiors. Candidates should have a sufficient knowledge of AutoCAD and CATIA V5 to adequately review Engineering designs. Must be proficient in FEMAP and NASTRAN. Must have excellent communication and report writing skills. Assignments are executed under the direction of the Engineering Lead or Group Head to meet Engineering, Certification, and manufacturing schedules. Analysis methods and design standards to be employed are consistent with company standards and accepted methods. Additional responsibilities are outlined in the job description and as assigned. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

View Job Description

Stress Analyst 5 - Interiors

Responsibilities include performing stress analysis and related activities for new and derivative designs of interior furnishings and amenities as part of outfitting new aircraft. This includes review of Engineering models and drawings, preparing load calculations, and writing stress reports in collaboration with the Structural Engineering group and Structural AR's providing approvals. Example designs include custom cabinetry such as galleys, lavatories, closets, and other storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. Analysis of airframe modifications to meet the requirements of interior installation may also be involved. Additional responsibilities include aircraft level analysis such as decompression and floor loading analysis. Analysis is done utilizing Classical hand analysis and Finite Element Modeling using FEMAP with Nastran. Must have working knowledge of Title 14 of the Code of Federal Regulations (14CFR - especially Chapter I, Part 25), as it pertains to Federal Aviation Administration (FAA) regulation procedures and the STC process as it relates to certification of Aircraft Interiors. Candidates should have a sufficient knowledge of AutoCAD and CATIA V5 to adequately review Engineering designs. Must be proficient in FEMAP and NASTRAN. Must have excellent communication and report writing skills. Assignments are executed under the direction of the Engineering Lead or Group Head to meet Engineering, Certification, and manufacturing schedules. Analysis methods and design standards to be employed are consistent with company standards and accepted methods. Additional responsibilities are outlined in the job description and as assigned. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 13 yrs specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

12+ months, possible extension and FTE opportunity

View Job Description

Information Technology Engineer 4

ID # 376765 Easy Apply Apply with Login

Huntsville, Alabama

April 30 2024

Openings # 1

6+ months, possible extension and possible FTE opportunity

Required Skills Required • 8 years of increasing responsibility in multi-system, multi-platform, Windows Domain. Experience managing a server infrastructure and maintaining daily operations with a focus on security management. Proven project management, process improvement, and documentation skills. • Extensive experience working within a Windows Domain. • Must meet and be current with DOD 8570 IAT II certification requirements (Security +, CCNA Security, CySA+, GICSP, GSEC, SSCP). Candidate will be responsible to maintain DoD 8570 certification for the full contract period. Desired Skills: • - Hands on experience with DoD processes, Agile and DevOps methodologies. • - Ability to work in a fast paced environment and adapt to change. • - Good communication skills with the ability to establish and maintain good working relationships with software developers, system administrators, system engineers, system analysts and test engineers. Position Responsibilities • Specific tasks will include, but are not limited to: • - Configuring Windows Domain Policy within the C2BMC Huntsville Support Infrastructure (SI) Domian • - Managing Active Directory based identity services and role-based access controls • - System hardening: Quarterly STIG Reviews, ACAS Compliance, vulnerability mitigations, and event log management • - Administering Windows Domain Controllers, Windows Member Servers, Windows Desktop, Windows Deployment Servers, WSUS, Office 365, Active Directory Management, and DNS Configuration • - Administering the infrastructures Identity Management Solutions (Delinea), Multi Factor Authentication (OCSP Repeater/Responder), Network Attached Storage (NetApp), Data Retention, Data Back Ups (IBM Spectrum Protect), Disaster Recovery, and EXSI Virtual Cluster. • - Help Desk and IT ticket support as needed • - Other tasking as assigned by the IT Lead and Lab Manager Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

View Job Description

Information Technology Engineer 4

Required Skills Required • 8 years of increasing responsibility in multi-system, multi-platform, Windows Domain. Experience managing a server infrastructure and maintaining daily operations with a focus on security management. Proven project management, process improvement, and documentation skills. • Extensive experience working within a Windows Domain. • Must meet and be current with DOD 8570 IAT II certification requirements (Security +, CCNA Security, CySA+, GICSP, GSEC, SSCP). Candidate will be responsible to maintain DoD 8570 certification for the full contract period. Desired Skills: • - Hands on experience with DoD processes, Agile and DevOps methodologies. • - Ability to work in a fast paced environment and adapt to change. • - Good communication skills with the ability to establish and maintain good working relationships with software developers, system administrators, system engineers, system analysts and test engineers. Position Responsibilities • Specific tasks will include, but are not limited to: • - Configuring Windows Domain Policy within the C2BMC Huntsville Support Infrastructure (SI) Domian • - Managing Active Directory based identity services and role-based access controls • - System hardening: Quarterly STIG Reviews, ACAS Compliance, vulnerability mitigations, and event log management • - Administering Windows Domain Controllers, Windows Member Servers, Windows Desktop, Windows Deployment Servers, WSUS, Office 365, Active Directory Management, and DNS Configuration • - Administering the infrastructures Identity Management Solutions (Delinea), Multi Factor Authentication (OCSP Repeater/Responder), Network Attached Storage (NetApp), Data Retention, Data Back Ups (IBM Spectrum Protect), Disaster Recovery, and EXSI Virtual Cluster. • - Help Desk and IT ticket support as needed • - Other tasking as assigned by the IT Lead and Lab Manager Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

6+ months, possible extension and FTE opportunity

View Job Description

Quality Assurance Certification Specialist II

ID # 376764 Easy Apply Apply with Login

Savannah, Georgia

Portland, Oregon

May 20 2024

Openings # 1

ID # 376754 Easy Apply Apply with Login

Huntsville, Alabama

May 10 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

Regular and predictable attendance is required. Applies knowledge of company design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with company standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis. Describe the project/day-to-day activities they will be working on: This position is for a level 3, Product Review (or Liaison) Engineer, in Huntsville, AL. The position is based from Mesa, AZ, but is supported directly at company's supplier. The position requires direct engineering support for the depopulation efforts which remove previously fielded (or used) major assemblies, sub-assemblies, and detail components from AH-64 D-model Apaches for the purpose of repairing/restoring to a serviceable condition for re-use on AH-64 E-model Apaches utilizing technical/fleet service manuals. The components vary in terms of the state of serviceability, and component type. They consist of both primary and secondary, metallic and composite bonded structures, pneumatic and hydraulic systems, flight safety related components, and armament sub-systems. The position involves direct shop floor support, and frequent communication between the Supplier's Operations team, and Mesa's Engineering team

View Job Description

Product Review Engineer 3

Regular and predictable attendance is required. Applies knowledge of company design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with company standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis. Describe the project/day-to-day activities they will be working on: This position is for a level 3, Product Review (or Liaison) Engineer, in Huntsville, AL. The position is based from Mesa, AZ, but is supported directly at company's supplier. The position requires direct engineering support for the depopulation efforts which remove previously fielded (or used) major assemblies, sub-assemblies, and detail components from AH-64 D-model Apaches for the purpose of repairing/restoring to a serviceable condition for re-use on AH-64 E-model Apaches utilizing technical/fleet service manuals. The components vary in terms of the state of serviceability, and component type. They consist of both primary and secondary, metallic and composite bonded structures, pneumatic and hydraulic systems, flight safety related components, and armament sub-systems. The position involves direct shop floor support, and frequent communication between the Supplier's Operations team, and Mesa's Engineering team

12+ months, possible extension and FTE opportunity

View Job Description

Manufacturing Planner 4 - Electrical

ID # 376753 Easy Apply Apply with Login

View Job Description

Manufacturing Planner 4 - Electrical

View Job Description

Electronic Systems Design & Analysis Engineer 4

ID # 376752 Easy Apply Apply with Login

Berkeley, Missouri

May 17 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

View Job Description

Electronic Systems Design & Analysis Engineer 4

View Job Description

Payload Systems Design Engineer 3

ID # 376751 Easy Apply Apply with Login

Everett, Washington

May 10 2024

Openings # 6

12+ months, possible extension and possible FTE opportunity

View Job Description

Payload Systems Design Engineer 3

12+ months, possible extension and FTE opportunity

View Job Description

Payload Systems Design Engineer 4

ID # 376750 Easy Apply Apply with Login

Everett, Washington

May 10 2024

Openings # 4

View Job Description

Industrial Engineer 3

View Job Description

F&DT Stress Engineer 5

ID # 376741 Easy Apply Apply with Login

Savannah, Georgia

May 10 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

View Job Description

F&DT Stress Engineer 5

12+ months, possible extension and FTE opportunity

View Job Description

Structural Analysis Engineer 3

ID # 376740 Easy Apply Apply with Login

Tukwila, Washington

April 11 2024

Openings # 3

12+ months, possible extension and possible FTE opportunity

View Job Description

Structural Analysis Engineer 3

View Job Description

MP&P Technical Analyst 3

ID # 376739 Easy Apply Apply with Login

View Job Description

MP&P Technical Analyst 3

View Job Description

Weights & Mass Property Engineer 3

ID # 376738 Easy Apply Apply with Login

Oklahoma City, Oklahoma

April 26 2024

Seattle, Washington

April 04 2024

Openings # 1

10+ months, possible extension and possible FTE opportunity

Position is on-call & part-time 24 hours a week. Schedule will depend on the week! Job Description Qualifications: We are Company Research & Technology (BR&T): Company's global research and development team creating and implementing innovative technologies that make the impossible possible and enabling the future of aerospace. We are engineers and technicians, skilled scientists and bold innovators; Join us and put your passion, determination, and skill to work building the future! #TheFutureIsBuiltHere #ChangeTheWorld Materials and Manufacturing Technology is focused on discovering, developing and transitioning innovative materials and manufacturing technologies into products. Our highly capable workforce excels in a team environment of challenge and opportunity on multiple projects, and partners with business units, government customers, global suppliers, and universities to rapidly mature key technologies to production readiness. Our team is looking for a high performing, collaborative Chemical Technology Engineer to evaluate, analyze and define innovative sealants systems and materials across the Company Enterprise and into the supplier network. We are currently hiring for a broad range of experience levels including; Early-Level Engineer located in Seattle, Washington. Position Responsibilities: • Evaluates parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications • Analyzes failed parts and processes to reduce or eliminate future failures • Generates test plans, catalog test data, identifies and categorizes failures, determines root cause and documents results and recommendations as well as operating procedures • Proposes, develops and validates revisions to procedures and specifications. • Determines suitability of parts, materials and processes and coordinates resolution of issues with suppliers and customers • Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology • Provides knowledge and technical consultation to internal and external customers • Performs sealants testing to analyze and develop materials with improved characteristics and properties for future and sustaining program efforts • Generates testing coupons, operate test equipment, conduct test activities, monitor test procedures, author test reports, and maintains compliance with laboratory safety practices

View Job Description

MP&P Engineer 2

Position is on-call & part-time 24 hours a week. Schedule will depend on the week! Job Description Qualifications: We are Company Research & Technology (BR&T): Company's global research and development team creating and implementing innovative technologies that make the impossible possible and enabling the future of aerospace. We are engineers and technicians, skilled scientists and bold innovators; Join us and put your passion, determination, and skill to work building the future! #TheFutureIsBuiltHere #ChangeTheWorld Materials and Manufacturing Technology is focused on discovering, developing and transitioning innovative materials and manufacturing technologies into products. Our highly capable workforce excels in a team environment of challenge and opportunity on multiple projects, and partners with business units, government customers, global suppliers, and universities to rapidly mature key technologies to production readiness. Our team is looking for a high performing, collaborative Chemical Technology Engineer to evaluate, analyze and define innovative sealants systems and materials across the Company Enterprise and into the supplier network. We are currently hiring for a broad range of experience levels including; Early-Level Engineer located in Seattle, Washington. Position Responsibilities: • Evaluates parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications • Analyzes failed parts and processes to reduce or eliminate future failures • Generates test plans, catalog test data, identifies and categorizes failures, determines root cause and documents results and recommendations as well as operating procedures • Proposes, develops and validates revisions to procedures and specifications. • Determines suitability of parts, materials and processes and coordinates resolution of issues with suppliers and customers • Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology • Provides knowledge and technical consultation to internal and external customers • Performs sealants testing to analyze and develop materials with improved characteristics and properties for future and sustaining program efforts • Generates testing coupons, operate test equipment, conduct test activities, monitor test procedures, author test reports, and maintains compliance with laboratory safety practices

10+ months, possible extension and FTE opportunity

View Job Description

Test & Evaluation Engineer 3

ID # 376734 Easy Apply Apply with Login

Huntsville, Alabama

April 10 2024

Openings # 1

ID # 376731 Easy Apply Apply with Login

Berkeley, Missouri

May 10 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

**Must be able to obtain Secret Clearance** Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction. Design test systems to meet test requirements. Define requirements for system architecture utilizing system engineering approach. Supports the development and verification of test methods. Provide functional verification and validation of all instrumentation systems prior to test phase. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Perform operations and maintenance of test systems. Direct the implementation of solutions to emergent requirements during test programs. Participate in proposal preparation including labor and material estimating. Develop project plans using the principles of project management to achieve program cost, schedule and performance goals. Develop, document, and maintain processes, methods, and tools. Work statement is a non-managerial role, non-leadership role. Regular and predicted attendance is required.

View Job Description

Test & Evaluation Engineer 3 - Instrumentation

**Must be able to obtain Secret Clearance** Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction. Design test systems to meet test requirements. Define requirements for system architecture utilizing system engineering approach. Supports the development and verification of test methods. Provide functional verification and validation of all instrumentation systems prior to test phase. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Perform operations and maintenance of test systems. Direct the implementation of solutions to emergent requirements during test programs. Participate in proposal preparation including labor and material estimating. Develop project plans using the principles of project management to achieve program cost, schedule and performance goals. Develop, document, and maintain processes, methods, and tools. Work statement is a non-managerial role, non-leadership role. Regular and predicted attendance is required.

12+ months, possible extension and FTE opportunity

View Job Description

Electrophysics Engineer 4 - Optical/Opto Electronics

ID # 376730 Easy Apply Apply with Login

St Charles, Missouri

May 10 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

**Must be able to obtain Secret Clearance** The Precision Engagement Systems Team located in St. Charles, MO is seeking a Senior Imaging Sensor Algorithm Engineer and Analyst to join some of the leading minds in industry to develop critical sensor/seeker solutions that will inspire you with their application, mathematical technology, and implementation. Our team is diverse and full of opportunities that will challenge you in new and intriguing ways, let you learn from a highly experienced foundation of team knowledge, and allow you to contribute from your unique experiences to expand the collective capability of the team. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and build something better for yourself, for our customers, and for the world. Works under minimal direction. Work statement is a non-managerial role, non-leadership role. Regular and predicted attendance is required. Position Responsibilities: • Leads development and analysis of Imaging Sensor algorithms for navigation and guidance applications on Weapon systems. • Contributes to a multi-level team as consultant in the test and issue resolution of sensor based algorithms across the portfolio of weapons applications. • Leads development of trade studies, modeling, simulation and other forms of analysis to predict real-world behavior, impacts on system performance and to optimize design around complex requirements. • Leads development and execution of critical tests to validate performance of designs to requirements. • Contribute to a multi-level team with a deep theoretical and practical foundation for developing cutting-edge models, simulation tools, and algorithm strategies for systems using Infrared, Laser and Radar sensors and provide technical mentorship for early career engineers. • Collect and review data from hardware-in-the-loop tests and flight test to measure/validate performance against design requirements. • Evaluate candidate sensor systems to increase weapon or other airborne system capabilities, decrease cost, and ensure compliance to requirements. • Supports project management by coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. • Have opportunities to travel in support of flight test activities and troubleshoot operational and delivered product service anomalies where you will see in-person the awesome capability of our Air Force, Navy, and international customers.

View Job Description

Electrophysics Engineer 4 - Optical/Opto Electronics

**Must be able to obtain Secret Clearance** The Precision Engagement Systems Team located in St. Charles, MO is seeking a Senior Imaging Sensor Algorithm Engineer and Analyst to join some of the leading minds in industry to develop critical sensor/seeker solutions that will inspire you with their application, mathematical technology, and implementation. Our team is diverse and full of opportunities that will challenge you in new and intriguing ways, let you learn from a highly experienced foundation of team knowledge, and allow you to contribute from your unique experiences to expand the collective capability of the team. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and build something better for yourself, for our customers, and for the world. Works under minimal direction. Work statement is a non-managerial role, non-leadership role. Regular and predicted attendance is required. Position Responsibilities: • Leads development and analysis of Imaging Sensor algorithms for navigation and guidance applications on Weapon systems. • Contributes to a multi-level team as consultant in the test and issue resolution of sensor based algorithms across the portfolio of weapons applications. • Leads development of trade studies, modeling, simulation and other forms of analysis to predict real-world behavior, impacts on system performance and to optimize design around complex requirements. • Leads development and execution of critical tests to validate performance of designs to requirements. • Contribute to a multi-level team with a deep theoretical and practical foundation for developing cutting-edge models, simulation tools, and algorithm strategies for systems using Infrared, Laser and Radar sensors and provide technical mentorship for early career engineers. • Collect and review data from hardware-in-the-loop tests and flight test to measure/validate performance against design requirements. • Evaluate candidate sensor systems to increase weapon or other airborne system capabilities, decrease cost, and ensure compliance to requirements. • Supports project management by coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. • Have opportunities to travel in support of flight test activities and troubleshoot operational and delivered product service anomalies where you will see in-person the awesome capability of our Air Force, Navy, and international customers.

12+ months, possible extension and FTE opportunity

View Job Description

Structural Analysis Engineer 4

Openings # 4

12+ months, possible extension and possible FTE opportunity

View Job Description

Manufacturing Planner 3

View Job Description

Systems Engineer 3

ID # 376725 Easy Apply Apply with Login

Everett, Washington

April 26 2024

Openings # 4

7+ months, possible extension and possible FTE opportunity

The Airplane Safety Engineering (ASE) team is looking for Airplane Safety Engineers - Development Programs (Onsite) to join our team in Everett, Washington. The ASE team is a division of the Enterprise Safety and Mission Assurance Organization. Our team is actively engaged with airplane programs that currently include 737-10 MAX, 777-9, 777-8 Freighter, and future product development programs. As an Airplane Safety Engineer, you will be responsible for working cross functionally to ensure airplane level safety analysis are appropriately conducted. Understanding the complex integration of airplane systems, human factors, and airplane integration into the operational environment is required in this role. The Airplane Safety deliverables directly feed airplane compliance and require an extreme attention to detail as well as a healthy engineering curiosity. Our team works hard to build relationships with our customers across all of engineering and the programs. To do this we must be technically savvy, great communicators, and have a passion to learn. We are involved in every aspect of designing and certifying our products and must maintain an unrelenting focus on compliance, safety, and product integrity without compromise. If you’re ready for a challenging new role that is critical to the success of our programs then this might be the job for you. Successful candidates will be reliable, trustworthy, and accountable for delivering results. Familiarity with 25.1309, ARP-4754, ARP-4761, safety analysis, and hazard assessments will greatly benefit you in this role. The successful candidate will have: • Strong written and verbal communication skills. • Ability to work effectively with a diverse engineering team. • Intrinsic aptitude for taking initiative, leading cross functional teams and complex projects. • Ability to take ownership of work activities to ensure they are completed accurately, efficiently, and in a timely manner. Position Responsibilities: • Providing safety design and analysis expertise to program stakeholders and leadership • Validating and verifying airplane level safety requirements • Developing certification strategies for systems and airplane level safety issues • Executing airplane level threat analyses (bird strike, rotor burst, cargo fire, tire and wheel failures, etc.) • Representing ASE in airplane level design trade studies, coordination of safety analyses, and functional integration assessments • Ensuring adequate redundancy and physical separation of critical systems • Leading airplane level safety analyses like Runway Excursion or Airplane Common Mode to ensure integration across multiple functional systems • Utilize Model Based System Engineering tools to analyze architectures/designs and develop safety deliverables This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed locations. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

View Job Description

Systems Engineer 3

The Airplane Safety Engineering (ASE) team is looking for Airplane Safety Engineers - Development Programs (Onsite) to join our team in Everett, Washington. The ASE team is a division of the Enterprise Safety and Mission Assurance Organization. Our team is actively engaged with airplane programs that currently include 737-10 MAX, 777-9, 777-8 Freighter, and future product development programs. As an Airplane Safety Engineer, you will be responsible for working cross functionally to ensure airplane level safety analysis are appropriately conducted. Understanding the complex integration of airplane systems, human factors, and airplane integration into the operational environment is required in this role. The Airplane Safety deliverables directly feed airplane compliance and require an extreme attention to detail as well as a healthy engineering curiosity. Our team works hard to build relationships with our customers across all of engineering and the programs. To do this we must be technically savvy, great communicators, and have a passion to learn. We are involved in every aspect of designing and certifying our products and must maintain an unrelenting focus on compliance, safety, and product integrity without compromise. If you’re ready for a challenging new role that is critical to the success of our programs then this might be the job for you. Successful candidates will be reliable, trustworthy, and accountable for delivering results. Familiarity with 25.1309, ARP-4754, ARP-4761, safety analysis, and hazard assessments will greatly benefit you in this role. The successful candidate will have: • Strong written and verbal communication skills. • Ability to work effectively with a diverse engineering team. • Intrinsic aptitude for taking initiative, leading cross functional teams and complex projects. • Ability to take ownership of work activities to ensure they are completed accurately, efficiently, and in a timely manner. Position Responsibilities: • Providing safety design and analysis expertise to program stakeholders and leadership • Validating and verifying airplane level safety requirements • Developing certification strategies for systems and airplane level safety issues • Executing airplane level threat analyses (bird strike, rotor burst, cargo fire, tire and wheel failures, etc.) • Representing ASE in airplane level design trade studies, coordination of safety analyses, and functional integration assessments • Ensuring adequate redundancy and physical separation of critical systems • Leading airplane level safety analyses like Runway Excursion or Airplane Common Mode to ensure integration across multiple functional systems • Utilize Model Based System Engineering tools to analyze architectures/designs and develop safety deliverables This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed locations. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

7+ months, possible extension and FTE opportunity

View Job Description

Electronic Design & Analysis Engineer 5

ID # 376723 Easy Apply Apply with Login

Plano, Texas

April 26 2024

Openings # 1

6+ months, possible extension and possible FTE opportunity

This position will be focused on the organization’s current efforts around embedded hardware development. A successful candidate will need to be able to provide technical guidance and accountability to the engineering teams and assist with troubleshooting as needed. They will need to lead the team through the development of the hardware architecture, test procedures/test scripts, help direct test equipment design , test script integration, and help ensure the finalized testing will satisfy the requirements. The selected candidate will have prior experience in requirements review/development, architectural/conceptual design, simulation/analysis, schematic capture/layout, rapid prototyping, board bring-up, design verification testing, Electro Magnetic Interference (EMI)/ Electro Magnetic Compatibility (EMC) qualification testing, and system integration of complex designs. Your previous roles have provided you opportunities to assess and evaluate existing designs and resolve issues by proposing solutions quickly as issues are identified. You are a self-motivated individual that is interested in growing their overall hardware design knowledge in the support of product development related to avionics. Position Responsibilities: • Assists in developing electrical architecture and detailed specifications for various electronic products • Develops and reviews design requirements • Assists in verification of detailed designs consistent with requirements and specifications • Captures data for technical performance measures • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specification • Performs Trade Studies/Modeling (reliability and thermal) • Designs computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and models results (e.g., throughput, processing architecture, timing, capacity) • Simulation experience and creation of behavioral models with software, MATLAB and SPICE tools • Selection of components to be used in Avionics Electronics Designs • Solves problems concerning fielded hardware and software • Assists in providing engineering support throughout the lifecycle of the product • Assists with trade studies and literature research to support future product design • Develops automated test stations, test scripting, and specialized test equipment • (Lead/Senior) Uses technical knowledge to help influence decisions over multiple teams and products • (Lead/Senior) Provides technical guidance and accountability to the engineering teams and assist with troubleshooting as needed

View Job Description

Electronic Design & Analysis Engineer 5

This position will be focused on the organization’s current efforts around embedded hardware development. A successful candidate will need to be able to provide technical guidance and accountability to the engineering teams and assist with troubleshooting as needed. They will need to lead the team through the development of the hardware architecture, test procedures/test scripts, help direct test equipment design , test script integration, and help ensure the finalized testing will satisfy the requirements. The selected candidate will have prior experience in requirements review/development, architectural/conceptual design, simulation/analysis, schematic capture/layout, rapid prototyping, board bring-up, design verification testing, Electro Magnetic Interference (EMI)/ Electro Magnetic Compatibility (EMC) qualification testing, and system integration of complex designs. Your previous roles have provided you opportunities to assess and evaluate existing designs and resolve issues by proposing solutions quickly as issues are identified. You are a self-motivated individual that is interested in growing their overall hardware design knowledge in the support of product development related to avionics. Position Responsibilities: • Assists in developing electrical architecture and detailed specifications for various electronic products • Develops and reviews design requirements • Assists in verification of detailed designs consistent with requirements and specifications • Captures data for technical performance measures • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specification • Performs Trade Studies/Modeling (reliability and thermal) • Designs computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and models results (e.g., throughput, processing architecture, timing, capacity) • Simulation experience and creation of behavioral models with software, MATLAB and SPICE tools • Selection of components to be used in Avionics Electronics Designs • Solves problems concerning fielded hardware and software • Assists in providing engineering support throughout the lifecycle of the product • Assists with trade studies and literature research to support future product design • Develops automated test stations, test scripting, and specialized test equipment • (Lead/Senior) Uses technical knowledge to help influence decisions over multiple teams and products • (Lead/Senior) Provides technical guidance and accountability to the engineering teams and assist with troubleshooting as needed

6+ months, possible extension and FTE opportunity

View Job Description

Systems Engineer 3 - Full Stack Developer

ID # 376722 Easy Apply Apply with Login

View Job Description

Systems Engineer 3 - Full Stack Developer

View Job Description

Systems Engineer 3 - Reliability & Maintainability

ID # 376721 Easy Apply Apply with Login

Warner Robins, Georgia

April 26 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

**Must be US Citizen** Company Global Services (BGS) C-17 Globemaster is seeking a Reliability & Maintainability System Engineer for exciting opportunities with the Fleet Reliability & Analysis Team in Warner Robins, GA. Position Responsibilities: - Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. - Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. - Performs various analyses to optimize total system of systems and/or system architecture. - Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. - Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. - Participate in cross-functional technical issues. - Develop analysis methods to determine reliability of components, equipment and processes. - Prepare diagrams, charts, drawings, calculations and reports to define reliability problems and make recommendations for improvements. - Conduct failure analyses to recommend operational, maintenance, and process changes so as to maximize aircraft systems reliability, availability and life expectancy. Position Responsibilities: Conduct failure analyses to recommend operational, maintenance, and process changes so as to maximize aircraft systems reliability, availability and life expectancy Review/correct G081 maintenance data and aircraft status Review of field maintenance and failure data, track & analyze reliability & maintainability (R&M) performance Track and analyze R&M performance, High Driver Analysis, Re-Test-OK (RTOK) and Can Not Duplicate (CND) Analysis Conduct failure analysis and trending analysis to recommend maintenance, operational or process changes to optimize aircraft systems reliability, maintainability and availability Perform reliability processes including collecting data, developing metrics, and conducting trend analysis Work with Engineering, Provisioning, Asset Management to perform Reliability-Centered Maintenance (RCM) / Maintenance Steering Group (MSG-3) analysis of existing and modified systems

View Job Description

Systems Engineer 3 - Reliability & Maintainability

**Must be US Citizen** Company Global Services (BGS) C-17 Globemaster is seeking a Reliability & Maintainability System Engineer for exciting opportunities with the Fleet Reliability & Analysis Team in Warner Robins, GA. Position Responsibilities: - Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. - Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. - Performs various analyses to optimize total system of systems and/or system architecture. - Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. - Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. - Participate in cross-functional technical issues. - Develop analysis methods to determine reliability of components, equipment and processes. - Prepare diagrams, charts, drawings, calculations and reports to define reliability problems and make recommendations for improvements. - Conduct failure analyses to recommend operational, maintenance, and process changes so as to maximize aircraft systems reliability, availability and life expectancy. Position Responsibilities: Conduct failure analyses to recommend operational, maintenance, and process changes so as to maximize aircraft systems reliability, availability and life expectancy Review/correct G081 maintenance data and aircraft status Review of field maintenance and failure data, track & analyze reliability & maintainability (R&M) performance Track and analyze R&M performance, High Driver Analysis, Re-Test-OK (RTOK) and Can Not Duplicate (CND) Analysis Conduct failure analysis and trending analysis to recommend maintenance, operational or process changes to optimize aircraft systems reliability, maintainability and availability Perform reliability processes including collecting data, developing metrics, and conducting trend analysis Work with Engineering, Provisioning, Asset Management to perform Reliability-Centered Maintenance (RCM) / Maintenance Steering Group (MSG-3) analysis of existing and modified systems

12+ months, possible extension and FTE opportunity

View Job Description

Manufacturing Engineer 4

ID # 376720 Easy Apply Apply with Login

Huntington Beach, California

April 26 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

View Job Description

Manufacturing Engineer 4

View Job Description

Control Systems Engineer 5 - Flight Controls

ID # 376719 Easy Apply Apply with Login

Everett, Washington

April 01 2024

Openings # 9

12+ months, possible extension and possible FTE opportunity

The BCA Control Laws team is looking for motivated individuals to join the team as control law engineers, supporting various programs including 777-X, 737MAX, 787, Autonomy, and other development programs. The position offers exposure to a great variety of core GNC/Flight Controls tasks and experiences, including interactions of the control systems with the dynamics of the vehicle to assess factors such as robustness and margins, control structure interaction, performance evaluation, handling qualities, and loads in order to validate or assess the system design. The work also includes assisting in demonstrating compliance to applicable regulations and specifications by executing tests, performing analysis or simulation and design reviews in order to deliver a compliant product that achieves airworthiness certification. Common control law engineering tasks include: Position Responsibilities: Gathers, defines and documents system level requirements to support flight control and mission or trajectory requirements. Performs and documents design and analysis of Guidance, Navigation and Control (GNC) models and tools. Supports troubleshooting of routing operational anomalies, functional tests and services incidents. Executes tests, performs analysis or simulation and design review per FAA, MILSPEC and NASA guidance to deliver a compliant product. Supports development of solutions and disposition of issues to assure customer satisfaction. Participates in new business development efforts. Works under general supervision. Perform frequency domain analysis in Matlab/Simulink to assess system stability characteristics Perform time domain performance analysis Participate in the development and review of design requirements Show compliance to requirements via appropriate testing and analysis Develop and execute Detailed Test Procedures using flight controls test facilities with real flight hardware and software Participate in engineering development and pilot demonstrations in the engineering flight simulators Develop and execute software tests to support verification and validation activities Identify control law design and implementation problems Address in service squawks as necessary. Support flight tests.

View Job Description

Control Systems Engineer 5 - Flight Controls

The BCA Control Laws team is looking for motivated individuals to join the team as control law engineers, supporting various programs including 777-X, 737MAX, 787, Autonomy, and other development programs. The position offers exposure to a great variety of core GNC/Flight Controls tasks and experiences, including interactions of the control systems with the dynamics of the vehicle to assess factors such as robustness and margins, control structure interaction, performance evaluation, handling qualities, and loads in order to validate or assess the system design. The work also includes assisting in demonstrating compliance to applicable regulations and specifications by executing tests, performing analysis or simulation and design reviews in order to deliver a compliant product that achieves airworthiness certification. Common control law engineering tasks include: Position Responsibilities: Gathers, defines and documents system level requirements to support flight control and mission or trajectory requirements. Performs and documents design and analysis of Guidance, Navigation and Control (GNC) models and tools. Supports troubleshooting of routing operational anomalies, functional tests and services incidents. Executes tests, performs analysis or simulation and design review per FAA, MILSPEC and NASA guidance to deliver a compliant product. Supports development of solutions and disposition of issues to assure customer satisfaction. Participates in new business development efforts. Works under general supervision. Perform frequency domain analysis in Matlab/Simulink to assess system stability characteristics Perform time domain performance analysis Participate in the development and review of design requirements Show compliance to requirements via appropriate testing and analysis Develop and execute Detailed Test Procedures using flight controls test facilities with real flight hardware and software Participate in engineering development and pilot demonstrations in the engineering flight simulators Develop and execute software tests to support verification and validation activities Identify control law design and implementation problems Address in service squawks as necessary. Support flight tests.

12+ months, possible extension and FTE opportunity

View Job Description

Test & Evaluation Engineer 2

ID # 376718 Easy Apply Apply with Login

Ogden, Utah

April 26 2024

Openings # 1

6+ months, possible extension and possible FTE opportunity

View Job Description

Test & Evaluation Engineer 2

View Job Description

Project Engineer 4

ID # 376716 Easy Apply Apply with Login

Saint Charles, Missouri

May 03 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

**Must be able to obtain a Secret Clearance Post Start.** Position is 2nd Shift Our client is seeking a Senior Project Engineer to join the Precision Engagement Systems (PES) team located in Saint Charles, MO. As a part of the Space, Intelligence and Weapon Systems (SIWS) organization, Precision Engagement Systems (PES) is a dynamic and growing team with leadership that is focused on attracting and developing top talent in support of critical missions on Direct Attack (DA) and Cruise Missiles Systems (CMS) programs. Connected to our customers' missions, we deliver unique capability through our exceptional talent. The programs we support in Saint Charles, MO include Direct Attack weapons (JDAM, SDB, MOP, HAAWC and associated derivatives) and Cruise Missiles (SLAM ER, Harpoon and development weapons) utilized on various military aircraft, some ground-based platforms, and other future contract awards. Position Responsibilities Include: Work with our internal and external customers to identify requirements and build plans to support their needs Track progress to cost, schedule, and technical performance using Company Program Management Best Practices (PMBP) and Earned Value Management (EVM) Support the development of customer proposals, including development of competitive pricing and delivery dates Engage regularly with supply chain leadership to monitor supplier quality and performance Resolve technical issues through coordination with engineering and the Chief Engineer Manage deliverables by defining plans for risk mitigation, issues, and opportunities; and, monitoring baseline plans to assess project performance, productivity, and lessons learned Brief customers and leadership on program status; risks, issues, and opportunities; and help needed Standardize, develop, and document processes Additional Support: This job can encompass a variety of tasking including support for Correction Action Requests (CARs) received by the program; export authority support; and lean/process improvements Domestic and/or international travel as required to support program execution This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Saint Charles, MO.

View Job Description

Project Engineer 4

**Must be able to obtain a Secret Clearance Post Start.** Position is 2nd Shift Our client is seeking a Senior Project Engineer to join the Precision Engagement Systems (PES) team located in Saint Charles, MO. As a part of the Space, Intelligence and Weapon Systems (SIWS) organization, Precision Engagement Systems (PES) is a dynamic and growing team with leadership that is focused on attracting and developing top talent in support of critical missions on Direct Attack (DA) and Cruise Missiles Systems (CMS) programs. Connected to our customers' missions, we deliver unique capability through our exceptional talent. The programs we support in Saint Charles, MO include Direct Attack weapons (JDAM, SDB, MOP, HAAWC and associated derivatives) and Cruise Missiles (SLAM ER, Harpoon and development weapons) utilized on various military aircraft, some ground-based platforms, and other future contract awards. Position Responsibilities Include: Work with our internal and external customers to identify requirements and build plans to support their needs Track progress to cost, schedule, and technical performance using Company Program Management Best Practices (PMBP) and Earned Value Management (EVM) Support the development of customer proposals, including development of competitive pricing and delivery dates Engage regularly with supply chain leadership to monitor supplier quality and performance Resolve technical issues through coordination with engineering and the Chief Engineer Manage deliverables by defining plans for risk mitigation, issues, and opportunities; and, monitoring baseline plans to assess project performance, productivity, and lessons learned Brief customers and leadership on program status; risks, issues, and opportunities; and help needed Standardize, develop, and document processes Additional Support: This job can encompass a variety of tasking including support for Correction Action Requests (CARs) received by the program; export authority support; and lean/process improvements Domestic and/or international travel as required to support program execution This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Saint Charles, MO.

12+ months, possible extension and FTE opportunity

View Job Description

Support Engineering Technical Product Delivery Specialist 2

ID # 376715 Easy Apply Apply with Login

View Job Description

Support Engineering Technical Product Delivery Specialist 2

View Job Description

Product Support Hardware Engineer 3

ID # 376714 Easy Apply Apply with Login

Altus AFB, Oklahoma

April 19 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

**Active Secret Clearance required Post Start** HARDWARE ENGINEER - Applies engineering technical standards, principles, theories, concepts and techniques to support product support engineering and analysis to ensure supportability, sustainability, reliability, maintainability and operability of products and services throughout its lifecycle. Develops product definition, design and configuration. Defines, evaluates and maintains engineering supportability, operability and maintainability requirements for products, systems and programs. Analyzes data to produce support, flight operation and maintenance equipment requirements. Evaluates engineering changes based on customer requirements and proposes program changes and manages implementation of changes. Plans, researches, develops, analyzes, and designs modification and repair solutions that comply with customer, regulatory, Safety and company requirements. Establishes planning and design criteria to develop integrated support and maintenance infrastructure. Supports continued airworthiness. Provides engineering and on-site technical assistance to customer’s products including, ground support equipment, training devices, training facilities, operations facilities and maintenance facilities. Coordinates and supports proposal development. The C-17 Aircrew Training System (ATS) Training System Support Center (TSSC) Hardware Engineer performs logistics product support to ensure sustainment capability of C-17 Aircrew Training Devices (ATD); researches and provides technical information used to develop and maintain the C-17 ATDs and engineering data. Establishes systems support requirements, approaches and solutions; develops and documents processes. Provides logistics support to influence product designs; determines and develops supportability-related design approaches and solutions. Supports the data collection and analysis needs to respond to customer inquiries. Proposes, evaluates, validates and implements engineering changes. Provides hardware engineering support for the development of ATS Training System Change Requests (TSCR).

View Job Description

Product Support Hardware Engineer 3

**Active Secret Clearance required Post Start** HARDWARE ENGINEER - Applies engineering technical standards, principles, theories, concepts and techniques to support product support engineering and analysis to ensure supportability, sustainability, reliability, maintainability and operability of products and services throughout its lifecycle. Develops product definition, design and configuration. Defines, evaluates and maintains engineering supportability, operability and maintainability requirements for products, systems and programs. Analyzes data to produce support, flight operation and maintenance equipment requirements. Evaluates engineering changes based on customer requirements and proposes program changes and manages implementation of changes. Plans, researches, develops, analyzes, and designs modification and repair solutions that comply with customer, regulatory, Safety and company requirements. Establishes planning and design criteria to develop integrated support and maintenance infrastructure. Supports continued airworthiness. Provides engineering and on-site technical assistance to customer’s products including, ground support equipment, training devices, training facilities, operations facilities and maintenance facilities. Coordinates and supports proposal development. The C-17 Aircrew Training System (ATS) Training System Support Center (TSSC) Hardware Engineer performs logistics product support to ensure sustainment capability of C-17 Aircrew Training Devices (ATD); researches and provides technical information used to develop and maintain the C-17 ATDs and engineering data. Establishes systems support requirements, approaches and solutions; develops and documents processes. Provides logistics support to influence product designs; determines and develops supportability-related design approaches and solutions. Supports the data collection and analysis needs to respond to customer inquiries. Proposes, evaluates, validates and implements engineering changes. Provides hardware engineering support for the development of ATS Training System Change Requests (TSCR).

12+ months, possible extension and FTE opportunity

View Job Description

Structural Analysis Engineer 3

ID # 376712 Easy Apply Apply with Login

View Job Description

Structural Analysis Engineer 3

View Job Description

MP&P Technical Analyst 3 - NDE/Measurement

ID # 376710 Easy Apply Apply with Login

Tukwila, Washington

March 29 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

View Job Description

MP&P Technical Analyst 3 - NDE/Measurement

View Job Description

Numerical Control Programmer 3

ID # 376709 Easy Apply Apply with Login

Everett, Washington

April 19 2024

Openings # 2

6+ months, possible extension and possible FTE opportunity

View Job Description

Numerical Control Programmer 3

6+ months, possible extension and FTE opportunity

View Job Description

Mission Systems Electronic Warfare Self Protection Hardware Engineer 3

ID # 376707 Easy Apply Apply with Login

Oklahoma City, Oklahoma

Everett, Washington

March 21 2024

Openings # 4

12+ months, possible extension and possible FTE opportunity

View Job Description

Systems Engineer 3 - Reliability and Maintainability

12+ months, possible extension and FTE opportunity

View Job Description

MP&P Engineer 1

Systems Engineer 3

Charleston, South Carolina

March 15 2024

Openings # 7

12+ months, possible extension and possible FTE opportunity

Product Review Engineer (Liaison Engineer) - level 5 Contractors are eligible for a $600/week Per Diem if you meet guidelines Position is 100% onsite in Charleston, SC • Shifts support will be required for 1st, 2nd and 3rd along with weekend support. Temporary travel maybe required as well. At Company, we are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you’ll learn and grow, contributing to work that shapes the world. Find your future with us. Position Responsibilities Duties will include (but are not limited to): • Applies knowledge of Company design principles to assess and resolve product/process issues through the product lifecycle. • Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. • Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged. • Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations. • Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors. • The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence. • Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations. • When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.

View Job Description

Product Review Engineer 5

Product Review Engineer (Liaison Engineer) - level 5 Contractors are eligible for a $600/week Per Diem if you meet guidelines Position is 100% onsite in Charleston, SC • Shifts support will be required for 1st, 2nd and 3rd along with weekend support. Temporary travel maybe required as well. At Company, we are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you’ll learn and grow, contributing to work that shapes the world. Find your future with us. Position Responsibilities Duties will include (but are not limited to): • Applies knowledge of Company design principles to assess and resolve product/process issues through the product lifecycle. • Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. • Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged. • Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations. • Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors. • The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence. • Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations. • When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.

12+ months, possible extension and FTE opportunity

View Job Description

Engineering Technical Design Instructor

ID # 376663 Easy Apply Apply with Login

Savannah, Georgia

April 01 2024

Openings # 1

12+ months, possible extension and possible FTE opportunity

View Job Description

Engineering Technical Design Instructor

12+ months, possible extension and FTE opportunity

View Job Description

Structural Design Engineer 2

ID # 376659 Easy Apply Apply with Login

View Job Description

Structural Design Engineer 2

View Job Description

Structural Analysis Engineer 2

ID # 376658 Easy Apply Apply with Login

Everett, Washington

March 12 2024

Openings # 10

6+ months, possible extension and possible FTE opportunity

View Job Description

Structural Analysis Engineer 2

View Job Description

Structural Analysis Engineer 3

ID # 376657 Easy Apply Apply with Login

Everett, Washington

March 29 2024

Openings # 10

6+ months, possible extension and possible FTE opportunity

View Job Description

Structural Analysis Engineer 3

6+ months, possible extension and FTE opportunity

View Job Description

Structural Design Engineer 3

ID # 376656 Easy Apply Apply with Login

View Job Description

Structural Design Engineer 3

View Job Description

Manufacturing Engineer II

ID # 376655 Easy Apply Apply with Login

Savannah, Georgia

April 01 2024

View Job Description

Loads & Dynamics Engineer 2

View Job Description

Software Engineer 3

ID # 376639 Easy Apply Apply with Login

St. Charles, Missouri

March 08 2024

Openings # 3

6+ months, possible extension and possible FTE opportunity

**Secret Clearance required to start** Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Performs software project management and software supplier management functions. Develops, selects, tailors and deploys software processes, tools and metrics. Executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards. Works under general direction. Position Responsibilities: • Design, development, and implements various mission systems software capabilities, models and simulations (sensors, weapons, etc.) • Use case and requirements development of software requirements • Develop test cases and unit tests for software in parallel with development of new functionality • Document test results • Participate and conduct peer reviews • Work with more senior engineers on software architecture design and definition • Operate on a multi-skill agile development team that is responsible for requirements, design, development, testing, and support of advanced mission systems software solutions There are great development opportunities to learn and grow outside of the software domain and we encourage our engineers to gain depth in tactical and mission systems competencies so that we can continuously improve and build better solutions. Our DevSecOps culture encourages our team members to take pride in developing, integrating, testing, and delivering innovative solutions.

View Job Description

Software Engineer 3

**Secret Clearance required to start** Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Performs software project management and software supplier management functions. Develops, selects, tailors and deploys software processes, tools and metrics. Executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards. Works under general direction. Position Responsibilities: • Design, development, and implements various mission systems software capabilities, models and simulations (sensors, weapons, etc.) • Use case and requirements development of software requirements • Develop test cases and unit tests for software in parallel with development of new functionality • Document test results • Participate and conduct peer reviews • Work with more senior engineers on software architecture design and definition • Operate on a multi-skill agile development team that is responsible for requirements, design, development, testing, and support of advanced mission systems software solutions There are great development opportunities to learn and grow outside of the software domain and we encourage our engineers to gain depth in tactical and mission systems competencies so that we can continuously improve and build better solutions. Our DevSecOps culture encourages our team members to take pride in developing, integrating, testing, and delivering innovative solutions.

6+ months, possible extension and FTE opportunity

View Job Description

Structural Analysis Engineer 4

ID # 376637 Easy Apply Apply with Login

Everett, Washington

February 23 2024

Openings # 15

12+ months, possible extension and possible FTE opportunity

Savannah, Georgia

February 12 2024

Openings # 4

12+ months, possible extension and possible FTE opportunity

View Job Description

NC Engineer III

12+ months, possible extension and FTE opportunity

View Job Description

Electrophysics Engineer 6 - Electromagnetic Compatibility

ID # 376591 Easy Apply Apply with Login

Oklahoma City, Oklahoma

April 12 2024

Openings # 2

12+ months, possible extension and possible FTE opportunity

This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. The engineer will be responsible for performing analyses, developing test procedures, conducting tests, troubleshooting, and writing and reviewing test reports in accordance with MIL-STD-461/464 and DO-160 for various systems on a multitude of air and space platforms recognized around the world. The engineer will also provide EMI/EMC expertise to design and modification efforts of products being developed throughout company. This position is for an experienced Electrical Engineering professional with deep knowledge and highly developed technical expertise. This position provides an excellent opportunity to develop new solutions, to grow and mentor the next generation of engineers. In addition, this will guide the candidates’ career towards the submittal of a candidacy for a position in the Company Technical Fellowship. Primary job responsibilities will include: Coordinate, test, and verify EMI/EMC requirements with teammates, customers, and system architects through the development and sustainment of various Company systems Develop and mentor teammates through the development of EMI/EMC Control Plans, Test Procedures, and Test Reports Lead EMI/EMC analyses and implement mitigation mechanisms to assure compatibility and safety of new and existing systems and interfaces Lead the evaluation of supplier data and design drawings to verify and correct system design to EMI/EMC standards Lead EMI/EMC testing of hardware and software systems in both lab and on-aircraft environments to verify adherence to Company and FAA and/or Military requirements Develop your career path to become a Technical Lead Engineer (TLE), leading to becoming a Company Designated Expert (BDE) and to the goal of candidacy for a position in the Company Technical Fellowship Support project management by tracking and reporting project status, by generating bids and requirements, and by providing work statement, budget, and schedule Other job responsibilities may include: Perform Nuclear Hardening, HIRF/Lightning, RF COSITE, and Antenna Coupling analyses and test Coordinate, test, and verify TEMPEST requirements with teammates, customers, and system architects through the development and sustainment of various company systems Develop and mentor teammates through the development of TEMPEST Control Plans, Test Procedures, and Test Reports Develop and implement Test Automation for aircraft modifications Apply EMI engineering technology experience to document and solve complex problems Perform trade studies, modeling, simulation and other forms of analyses to predict component, interconnects, and system performance and to optimize design Apply conversion, correction, and antenna factors to EMI/EMC analyses and test Work on a cross-functional support team and communicate clearly in various review boards both internally & externally Basic Qualifications (Required Skills/Experience): Must possess a Bachelor’s degree in engineering, engineering technology, engineering physics or physics. Must have previous experience in the defense or aerospace industry Must have previous experience of MIL-STD-461/464 and/or DO-160 EMI/EMC experience Must be familiar with the Electromagnetic concepts (such as RF isolation, shielding, grounding, and filtering) Must be willing to travel up to 25% of the time as required Preferred Qualifications (Desired Skills/Experience): 18 or more years’ related work experience (Senior Consultant Level) An ABET accredited Bachelor’s degree in electrical engineering or a Master’s/PhD in electrical engineering Active U.S. Security Clearance International Association for Radio, Telecommunications and Electromagnetics (iNARTE) Electromagnetic Compatibility (EMC) Engineer Certification Previous experience in TEMPEST analysis, test, and requirements development Knowledge of digital signal processing Knowledge and experience establishing, designing and verifying Power Quality requirements and testing using MIL-STD-704 Knowledge and experience generating Power Quality test procedures and test reports Hands-on experience with MATLAB Familiarity with Software tools: LTSpice, System Vision, PSPICE, MathCAD, AutoCAD, and Mentor DX Designer and Expedition Experience with MS Office tool suite Experience developing and delivering presentations (verbal and/or written) to key stakeholders Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 20 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+15 years' related work experience, Master+18 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

View Job Description

Electrophysics Engineer 6 - Electromagnetic Compatibility

This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. The engineer will be responsible for performing analyses, developing test procedures, conducting tests, troubleshooting, and writing and reviewing test reports in accordance with MIL-STD-461/464 and DO-160 for various systems on a multitude of air and space platforms recognized around the world. The engineer will also provide EMI/EMC expertise to design and modification efforts of products being developed throughout company. This position is for an experienced Electrical Engineering professional with deep knowledge and highly developed technical expertise. This position provides an excellent opportunity to develop new solutions, to grow and mentor the next generation of engineers. In addition, this will guide the candidates’ career towards the submittal of a candidacy for a position in the Company Technical Fellowship. Primary job responsibilities will include: Coordinate, test, and verify EMI/EMC requirements with teammates, customers, and system architects through the development and sustainment of various Company systems Develop and mentor teammates through the development of EMI/EMC Control Plans, Test Procedures, and Test Reports Lead EMI/EMC analyses and implement mitigation mechanisms to assure compatibility and safety of new and existing systems and interfaces Lead the evaluation of supplier data and design drawings to verify and correct system design to EMI/EMC standards Lead EMI/EMC testing of hardware and software systems in both lab and on-aircraft environments to verify adherence to Company and FAA and/or Military requirements Develop your career path to become a Technical Lead Engineer (TLE), leading to becoming a Company Designated Expert (BDE) and to the goal of candidacy for a position in the Company Technical Fellowship Support project management by tracking and reporting project status, by generating bids and requirements, and by providing work statement, budget, and schedule Other job responsibilities may include: Perform Nuclear Hardening, HIRF/Lightning, RF COSITE, and Antenna Coupling analyses and test Coordinate, test, and verify TEMPEST requirements with teammates, customers, and system architects through the development and sustainment of various company systems Develop and mentor teammates through the development of TEMPEST Control Plans, Test Procedures, and Test Reports Develop and implement Test Automation for aircraft modifications Apply EMI engineering technology experience to document and solve complex problems Perform trade studies, modeling, simulation and other forms of analyses to predict component, interconnects, and system performance and to optimize design Apply conversion, correction, and antenna factors to EMI/EMC analyses and test Work on a cross-functional support team and communicate clearly in various review boards both internally & externally Basic Qualifications (Required Skills/Experience): Must possess a Bachelor’s degree in engineering, engineering technology, engineering physics or physics. Must have previous experience in the defense or aerospace industry Must have previous experience of MIL-STD-461/464 and/or DO-160 EMI/EMC experience Must be familiar with the Electromagnetic concepts (such as RF isolation, shielding, grounding, and filtering) Must be willing to travel up to 25% of the time as required Preferred Qualifications (Desired Skills/Experience): 18 or more years’ related work experience (Senior Consultant Level) An ABET accredited Bachelor’s degree in electrical engineering or a Master’s/PhD in electrical engineering Active U.S. Security Clearance International Association for Radio, Telecommunications and Electromagnetics (iNARTE) Electromagnetic Compatibility (EMC) Engineer Certification Previous experience in TEMPEST analysis, test, and requirements development Knowledge of digital signal processing Knowledge and experience establishing, designing and verifying Power Quality requirements and testing using MIL-STD-704 Knowledge and experience generating Power Quality test procedures and test reports Hands-on experience with MATLAB Familiarity with Software tools: LTSpice, System Vision, PSPICE, MathCAD, AutoCAD, and Mentor DX Designer and Expedition Experience with MS Office tool suite Experience developing and delivering presentations (verbal and/or written) to key stakeholders Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 20 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+15 years' related work experience, Master+18 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

12+ months, possible extension and FTE opportunity

View Job Description

Avionics/Electronic Systems Engineer 5

View Job Description

Systems Engineer 4

View Job Description

ID # 376547 Easy Apply Apply with Login

Savannah, Georgia

January 08 2024

Openings # 4

12+ months, possible extension and possible FTE opportunity

Must be willing to work any shift. Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Author DRDI/DMT rework instructions to support effective corrective actions. 4. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 5. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 6. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 7. Investigate and assist in preparing justification for equipment and facility requests. 8. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 9. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 10. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 11. Incorporate Lean Manufacturing Methodology into existing and future processes. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 14. Support all Safety, Sustainability and Ergonomic Initiatives. . 15. Aid in development and maintenance of Business Continuity Plan. . Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. . 3. Perform other duties as assigned.

View Job Description

Manufacturing Engineer II

Must be willing to work any shift. Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Author DRDI/DMT rework instructions to support effective corrective actions. 4. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 5. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 6. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 7. Investigate and assist in preparing justification for equipment and facility requests. 8. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 9. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 10. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 11. Incorporate Lean Manufacturing Methodology into existing and future processes. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 14. Support all Safety, Sustainability and Ergonomic Initiatives. . 15. Aid in development and maintenance of Business Continuity Plan. . Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. . 3. Perform other duties as assigned.

12+ months, possible extension and FTE opportunity

View Job Description

Systems Engineer 3

ID # 376536 Easy Apply Apply with Login

St. Charles, Missouri

December 01 2023

Openings # 2

12+ months, possible extension and possible FTE opportunity

View Job Description

Systems Engineer 3

View Job Description

Manufacturing Engineer II

ID # 376496 Easy Apply Apply with Login

Savannah, Georgia

November 20 2023

Openings # 1

12+ months, possible extension and possible FTE opportunity

Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Author DRDI/DMT rework instructions to support effective corrective actions. 4. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 5. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 6. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 7. Investigate and assist in preparing justification for equipment and facility requests. 8. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 9. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 10. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 11. Incorporate Lean Manufacturing Methodology into existing and future processes. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 14. Support all Safety, Sustainability and Ergonomic Initiatives. . 15. Aid in development and maintenance of Business Continuity Plan. . Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. . 3. Perform other duties as assigned.

View Job Description

Manufacturing Engineer II

Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 3. Author DRDI/DMT rework instructions to support effective corrective actions. 4. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 5. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 6. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 7. Investigate and assist in preparing justification for equipment and facility requests. 8. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 9. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 10. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 11. Incorporate Lean Manufacturing Methodology into existing and future processes. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 14. Support all Safety, Sustainability and Ergonomic Initiatives. . 15. Aid in development and maintenance of Business Continuity Plan. . Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. . 3. Perform other duties as assigned.

12+ months, possible extension and FTE opportunity

View Job Description

Stress MRB Engineer

ID # 376404 Easy Apply Apply with Login

View Job Description

Stress MRB Engineer

View Job Description

Electronic Design & Analysis Engineer 4 - Digital & Analog Circuits

ID # 376330 Easy Apply Apply with Login

Oklahoma City, Oklahoma

September 15 2023

Openings # 1

12+ months, possible extension and possible FTE opportunity

**Must be able to obtain Secret Clearance** Primary job responsibilities will include: Develop requirements management processes and tools and investigate actions necessary for requirements definition and flow-down improvement Perform and document design of complex electronic and electrical solutions ranging from Circuit Card Assemblies to Box-Level Assemblies in models and tools while guiding less experienced engineers in development and performance of the designs Develop certification criteria and methods with regulatory agencies Lead, organize and resolve cross-divisional problems to provide technical assistance to internal/external customers Assure cost, time effective, creative solutions and disposition of issues to assure customer satisfaction Perform a wide variety of complex trades studies to meet program requirements Lead work to modify, test, and validate that hardware and software system designs meet operational and functional requirements Lead the review of supplier and partner qualification data, the development of enclosure and LRU Design, and the Analysis of custom manufacturing as well as integration of COTS components within the design Lead activities in support of Supplier Management with make/buy recommendations and other technical services Support project management by tracking and reporting project status, by generating bids and requirements, and by providing work statement, budget, and schedule Other job responsibilities may include: Lead analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products Lead development of high-level and detailed designs consistent with requirements and specifications Identify, track, and status technical performance measures to measure progress and ensure compliance with requirements Plan research projects to develop concepts for future product designs to meet projected requirements Research specific technology advances for potential application to company business needs Develop automated test equipment to support aircraft test requirements This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): Must possess a Bachelor’s degree in engineering, engineering technology, engineering physics or physics. Must have previous experience in the defense or aerospace industry Must have at least 3 years of Experience in analyzing and translating requirements into system architecture, hardware and/or software design and interface specifications Must have at least 3 years of previous experience with DOORS Requirements Management Tool or similar Must be willing to travel up to 25% of the time as required Preferred Qualifications (Desired Skills/Experience): 13 or more years’ related work experience (Consultant Level) An ABET accredited Bachelor’s degree in electrical engineering or a Master’s/PhD in electrical engineering Knowledge of digital signal processing Familiarity with Software tools: LTSpice, System Vision, PSPICE, MathCAD, AutoCAD, and Mentor DX Designer and Expedition Previous experience in Circuit design, including some of the following: Embedded processors High end FPGAs, SOC FPGAs, state-of-the-art memory devices Standard communications and storage protocols Low power FPGAs, CPLDs Power sequencing, monitoring, management Previous experience with developing and coordinating supplier design requirements Previous experience with system and circuit level fault isolation Previous experience with box level and card level test planning and procedures Experience with MS Office tool suite Experience developing and delivering presentations (verbal and/or written) to key stakeholders Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

View Job Description

Electronic Design & Analysis Engineer 4 - Digital & Analog Circuits

**Must be able to obtain Secret Clearance** Primary job responsibilities will include: Develop requirements management processes and tools and investigate actions necessary for requirements definition and flow-down improvement Perform and document design of complex electronic and electrical solutions ranging from Circuit Card Assemblies to Box-Level Assemblies in models and tools while guiding less experienced engineers in development and performance of the designs Develop certification criteria and methods with regulatory agencies Lead, organize and resolve cross-divisional problems to provide technical assistance to internal/external customers Assure cost, time effective, creative solutions and disposition of issues to assure customer satisfaction Perform a wide variety of complex trades studies to meet program requirements Lead work to modify, test, and validate that hardware and software system designs meet operational and functional requirements Lead the review of supplier and partner qualification data, the development of enclosure and LRU Design, and the Analysis of custom manufacturing as well as integration of COTS components within the design Lead activities in support of Supplier Management with make/buy recommendations and other technical services Support project management by tracking and reporting project status, by generating bids and requirements, and by providing work statement, budget, and schedule Other job responsibilities may include: Lead analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products Lead development of high-level and detailed designs consistent with requirements and specifications Identify, track, and status technical performance measures to measure progress and ensure compliance with requirements Plan research projects to develop concepts for future product designs to meet projected requirements Research specific technology advances for potential application to company business needs Develop automated test equipment to support aircraft test requirements This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): Must possess a Bachelor’s degree in engineering, engineering technology, engineering physics or physics. Must have previous experience in the defense or aerospace industry Must have at least 3 years of Experience in analyzing and translating requirements into system architecture, hardware and/or software design and interface specifications Must have at least 3 years of previous experience with DOORS Requirements Management Tool or similar Must be willing to travel up to 25% of the time as required Preferred Qualifications (Desired Skills/Experience): 13 or more years’ related work experience (Consultant Level) An ABET accredited Bachelor’s degree in electrical engineering or a Master’s/PhD in electrical engineering Knowledge of digital signal processing Familiarity with Software tools: LTSpice, System Vision, PSPICE, MathCAD, AutoCAD, and Mentor DX Designer and Expedition Previous experience in Circuit design, including some of the following: Embedded processors High end FPGAs, SOC FPGAs, state-of-the-art memory devices Standard communications and storage protocols Low power FPGAs, CPLDs Power sequencing, monitoring, management Previous experience with developing and coordinating supplier design requirements Previous experience with system and circuit level fault isolation Previous experience with box level and card level test planning and procedures Experience with MS Office tool suite Experience developing and delivering presentations (verbal and/or written) to key stakeholders Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

12+ months, possible extension and FTE opportunity

View Job Description

Electrical Applications Engineer - EWIS

ID # 376305 Easy Apply Apply with Login

View Job Description

Electrical Applications Engineer - EWIS

View Job Description

Get Started on Your Career Journey with CTS Technical Services

Find Your Ideal Position

Career Opportunities